Penetrating Mold Resistant Sealant - IAQ 6040 (Violet): 8363

IAQ 6040 is a low-viscosity, translucent violet, mold resistant sealant designed for use on new construction materials.* This specially formulated, water based coating contains a fungistatic agent to resist mold growth on the dry coating surface. The low-viscosity 100% acrylic formula is easy to apply, and the translucent finish will not block the appearance of coated building materials. IAQ 6040 can be applied to wood, OSB, wallboard, concrete and other construction materials

Goes on clear and helps protect you and others from fungal growth!

• Fiberlock IAQ 6040 is a low viscosity, translucent violet sealant designed to seal new construction materials and resist fungal growth
• The low-viscosity 100% acrylic formula is easy-to-apply, and the translucent finish will not block the appearance of treated building materials
• Fiberlock IAQ 6040 can be used on wood, OSB, wallboard, concrete and other construction materials to withstand the moist, humid conditions that provide the ideal environment for fungal growth
• Fiberlock IAQ 6040 yields a translucent violet finish.ÿClear,ÿwhiteÿandÿblackÿfinishes are also availableÿ
• IAQ 6040 complies with the requirements for LEED EQ Credit 4.2, low-emitting materials: paints and coatings

Coverage:

• Smooth Surfaces: 400-450 ft2 /gal
• Porous Surfaces: 200-300 ft2 /gal

Drying Times (@ 70 - 77°F , 50% R.H.):

• To Touch: 1-2 hours
• To Recoat: 8-16 hours
• Minimum Application Temp: 50ºF (10ºC)

Product Specifications:

• Std Pkg UoM: 5 Gallon Containers
• Std Pkg Qty: 5 Galllons
• Solids by Weight ± 2%: 21.0%
• Solids by Volume ± 2%: 18.2%
• Viscosity at 70°F: 54 Kreb Units
• Specular Gloss: 25-40º @ 60º
• Flash Point: Non-combustible
• Shelf Life: 36 Months Min. (Original Sealed Container)
• Calculated VOC: 89 grams/liter