Arrive on the job ready to set up a dust barrier in minutes
Everything you need to create a dust barrier up to 16 feet wide and seal it on all four sides. The ZipWall® Toolkit is loaded with time-saving products that are easy to use and can be configured to solve most dust barrier needs.
The ZipWall Dust Barrier Toolkit offers the flexibility to meet practically any dust barrier installation challenge – setting up a plastic dust barrier, setting up a reusable-fabric dust barrier, creating an entry in a plastic barrier, creating a room within a room, covering a door, or sealing a barrier without tape – to name a few.
It contains everything you need to create a dust barrier up to 16 feet wide and seal it on all four sides. Complete with carry bags, this kit is reusable and works with drop-ceilings.
Contents:
- Five ZipWall® 12 foot spring-loaded poles
- Six FoamRail Span™ adjustable tapeless seals
- One FoamRail™ tapeless seal 2-pack
- Four wall mounts
- Five heads and non-skid plates
- Five GripDisk™ non-slip pads
- Two floor adaptors for ZipWall® 12 poles
- One ZipWall® heavy-duty zipper 2-pack
- One ZipDoor® standard door kit
- Two Edge™ heads & non-skid plates
- One ZipFast™ reusable barrier panel multi-pack
- Carry bags
Shipping information:
Weight: 43 lb
Dimensions: 12″ × 12″ × 60″
INSTRUCTIONS:
Create a 16 feet wide dust barrier and seal it on all four sides
- Choose your dust barrier material – reusable panels or plastic sheeting.
- Set up the barrier using three poles spaced 8 feet apart.
- Seal your barrier at the ceiling and floor with a Span™ attached to the top and bottom of a pole. You’ll need two poles, two floor adaptors, and four Spans.
- Seal each wall using one Span™ and a SidePress™. Add a FoamRail™ and SidePress™ if the wall is higher than 8 feet
- With plastic sheeting, create an entry using ZipWall® zippers. With reusable panels, use the 2.5 foot panel as a door.
Create a 40 foot wide plastic dust barrier
- Use plastic sheeting and five poles, spaced 10 feet apart.
Create a 10 x 10 foot room-within-a-room
- Use plastic sheeting and four poles..
Seal an existing door
Seal a hallway
- Use plastic sheeting or reusable barrier panels.
- Set up the barrier using two poles placed near the walls.
- With plastic sheeting, create an entry using ZipWall® zippers. With reusable panels, use zipper between panels as a door.
- If tight sealing is required, use FoamRail™ and Span™ tapeless seals along the ceiling, walls, and/or floor.
Set up a dust barrier with a drop-ceiling
- Use the Edge™ head & plate on the pole closest to the wall on either side of the barrier..