Pelsue Uni-Lite Portable Fall Arrest Post + Pelsue Uni-Lite Expandable Base Accessory + FB-SB3 Bolt-On Base Plate w/ Tie-Off Anchor

Here's the complete system for raising a Pelsue Uni-Lite Fall Arrest Post's anchor height: the FT-C70 post itself (9"D x 6'H, 39 lbs, carbon fiber, flexes to absorb fall force), the TFAT-14C Expandable Base Accessory, and a base plate.

This configuration includes the FB-SB3 Bolt-On Base Plate with Tie-Off Anchor, providing a bolt-on mounting point for Pelsue's FT and TFAT Series fall arrest towers. No welding is required, it bolts to surfaces with existing studs or threaded bosses in an 8-1/2" square pattern, or can be fastened to any suitable flat surface using standard hardware.

FB-SB3 General Specifications:

• Designed and tested as a mounting point for all Pelsue fall arrest towers
• When installed properly, supports all proof loads required by any Pelsue fall arrest tower — system rating depends on the tower pinned into the plate, not the base plate itself
• Pelsue cannot verify compatibility or compliance when used with any other brand of fall arrest structure

FB-SB3 Materials & Construction:

• Welded A36 steel

FB-SB3 Weight: 16-1/2 lbs. (7.5 kg)

An optional Carrying Case is available at checkout.