Pelsue Expandable Fall Arrest Post + FB-SW1 Weld-On Base Plate

The Pelsue Expandable Fall Arrest Post (TFAT-11A) is a telescopic aluminum post that adjusts from 7' to 11' via a pin attachment, giving you a taller anchor point without needing a separate expansion accessory. It's a single-person tie-off system, man-rated to 310 lbs, and weighs 75 lbs on its own.

Grab the Pelsue Expandable Fall Arrest Post (TFAT-11A) with the FB-SW1 Weld-On Base Plate, which features mounting ears for a permanent, welded installation.

FB-SW1 General Specifications:

• Intended to be permanently attached to structural steel members and used for the removable mounting of Pelsue fall arrest towers
• Plate is to be welded to the surface, adhering to all Pelsue guidelines

FB-SW1 Materials & Construction:

• General construction: Welded carbon steel
• Weld certification: AWS - D1.1
• Material: ASTM A36 steel

FB-SW1 Dimensions: Length 9.0" × Width 8.0" × Height 2.9" Weight: 12 lbs. (5.5 kg)

FB-SW1 Strength & Testing Data:

• Torsional proof load: 20,274 ft.-lb. (27,488 N-m) at pin hole center
• Equivalent load and angle: 5,400 lb. (2,449 kg) tensile force applied at a point 55 inches (1.4 m) above pinhole center at 55° off vertical

Note: The base plate itself is independently tested to a multi-person fall arrest anchorage rating (see testing data above). However, when paired with the TFAT-11A, overall system capacity is governed by the post's own rating: single-person tie-off, man-rated to 310 lbs.