Pelsue Expandable Fall Arrest Post + FB-SB3 Bolt-On Base Plate w/ Tie-Off Anchor

Pelsue's Expandable Fall Arrest Post (TFAT-11A) telescopes from 7' to 11' on its own via a pin attachment, unlike posts that require a separate accessory to reach a higher anchor point. It's a single-person tie-off system, man-rated to 310 lbs, weighing 75 lbs.

This combination includes the FB-SB3 Bolt-On Base Plate with Tie-Off Anchor, providing a bolt-on mounting point with no welding required — it bolts to surfaces with existing studs or threaded bosses in an 8-1/2" square pattern, or can be fastened to any suitable flat surface with standard hardware.

General Specifications:

• Designed and tested as a mounting point for Pelsue fall arrest towers
• When installed properly, supports the proof loads required by the tower it's paired with — system rating depends on the tower pinned into the plate, not the base plate itself
• Pelsue cannot verify compatibility or compliance when used with any other brand of fall arrest structure

Materials & Construction:

• Welded A36 steel

Weight: 16-1/2 lbs. (7.5 kg)

Note: Base plate rating is dependent on the tower it's paired with. For this configuration, that means single-person tie-off, man-rated to 310 lbs, per the TFAT-11A's own rating.