DELFIN 802 WD AIREX 2V - AIR POWERED EXPLOSION PROOF 80 WD 1V 21 Gallon (80 LT) Capacity Air operated industrial vacuum suitable for wet and dry applications

SUCTION UNIT

inside a strong steel chassis, which contains also sound absorbing material to minimize noise during service.The suction is developed by a venturi-type vented suction unit, protected inside a solid steel head, containing sound absorbing material that minimizes noise during service. The head includes a pressure and a vacuum gauge, in order to detect the clogging of the filter

FILTER UNIT
A floating device stops the suction whenever the liquid in the container reaches the maximum level and prevents overflowing. A propylene filter for liquids is installed upstream. This filter guarantees the efficient filtration of the vacuumed oil; an additional plastic foam filter prevents most of the liquid mist from getting to the motor. The dust filter is made of a double bag (polyester + nylon) and has a self cleaning system working on the pressure difference principle.

COLLECTION UNIT
The vacuum is assembled onto a sturdy steel chassis, and provided with industrial quality wheels, that make it suitable for mobile service even when used on rough surfaces.

• Vacuum gauge to detect filter clogging

• Compact and mobile
• Easy filter replacement
• Floating device to stop the suction when container is full
• Discharge hose for liquids
• Compressed air supply through a double Venturi suction unit
• Earth grounding
• Certificate for use in ATEX 1,2,21 and 22 areas

SUCTION UNIT
Atex zones ATEX Z1-2/21-22
Marking Ex II 2D Ex h IIIC T85°C Db - Ex ll 2G Ex h IIB T6 Gb
Air supply l / min 3000
Air supply pressure bar 6
Ø Air supply hose mm 12
Max water lift mmH2O 4180
Max air flow m3/h 300
Suction inlet mm 80
Noise level (EN ISO 3744) dB(A) 73

FILTER UNIT
Filter Type Bag
Surface - Diameter cm2-mm 8.000 - 420
Material - Efficiency IEC 60335-2-69 Polyester - ANT M

COLLECTION UNIT
Capacity lt 80

VOLUME
Dimensions cm 62x53x108h

Includes: 

SL.0158.0020 Inlet adaptor, 80mm vacuum side, 50mm hose cuff side, galvanized steel 

FH0027.50.10 50 mm (2") Hose, 10', Black, Lightweight polyethylene conductive copolymer hose with a black skimcoat reinforced with an integral polyethylene non-marking helix, includes FH0018 Hose Cuffs