IAQ 6100 is a clear mold resistant coating for professional use, that contains a fungistatic agent to resist mold growth on the dry coating surface. IAQ 6100 is a durable, flexible, and permeable 100% acrylic water-based coating. IAQ 6100 has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. IAQ 6100 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6100 can also be used on new structural materials during building construction
Durability Plus Excellent Mold Resistance
- IAQ 6100 mold resistant coating was developed to withstand moist, humid conditions that are ideal for mold growth
- Fiberlock IAQ 6100 does not contain any compounds with toxic metals such as barium, boron or zinc, which are present in other mold-resistant coatings
- Fiberlock IAQ 6100 is an extremely durable coating developed to withstand moist, humid conditions that provide the ideal environment for fungal growth
- This easy to apply, 100% acrylic coating offers the ultimate in durability in combination with excellent mold resistanceÿ
- Fiberlock IAQ 6100 contains an EPA-registered, broad-spectrum fungicide to prevent the growth of mold on the surface of the cured film
- Additionally, its smooth finish minimizes dirt buildup that provides nutrients for mold growth
Coverage:
- Smooth Surfaces: 350-600 ft2 /gal
- Porous Surfaces: 250-300 ft2 /gal
Drying Times (@ 70 - 77°F , 50% R.H.):
- To Touch: 1 hour
- To Recoat: 4-8 hours
- Minimum Application Temp: 50º (10ºC)
Product Specifications:
- Solids by Weight ± 2%: 28.8%
- Solids by Volume ± 2%: 25.8%
- Viscosity at 70°F: 85-90 Kreb Units
- Specular Gloss: 44º ± 3 @ 60º
- Flash Point: Non-combustible
- Shelf Life: 36 Months Min. (Original Sealed Container)
- Calculated VOC: 90 grams/liter
