Abatement Technologies HEPA-AIRE® Portable HEPA-Filtration System: PAS1600S

(No reviews yet) Write a Review
Leaves Warehouse w/in 24 Hours



The new SAFEGUARD Portable Air Scrubbers from Abatement Technologies® deliver more bang for your buck compared to other negative air filtration devices.

SAFEGUARD PAS1600SHS High-Performance HEPA Filtration System

pas1600shs.jpgThe SAFEGUARD PAS1600SHS high-performance model provides the enhanced performance required for the toughest structural drying jobs, such as use with specialized drying attachments, like the Adaptidry Floor and Wall Drying Kit from Injectidry®. A powerful 1.5 hp motor and back­ward curved blower that produce up to 50% more static capacity than competitive units dry structures faster, can increase productivity, and reduce drying time and costs. At peak airflow of 1,900 cfm, the PAS1600SHS can typically maintain 6 ACH in containment areas as large as 19,000 ft³.

SAFEGUARD Portable HEPA-Filtration Systems are equipped for creating negative pressure containment or use as a recirculating air scrubber. SAFEGUARD units capture particles in three or four filter stages with exceptional dirt holding capacity, including a final-stage HEPA filter tested and certified to capture at least 99.97% @ 0.3-micron particles. System operates safely on a 120 V/15 amp electric circuit with power to spare.


The PAS1600S model and PAS1600SHS model are equipped with many outstanding design innovations such as:pas1600-portable.jpg

  • Portability - Upright, single-module design with built-in transport dolly rolls easily on 12” diameter smooth, non-marking rear wheels
  • Ruggedness - Stainless steel cabinet is attractive and easy to clean
  • Efficiency - True, high-performance 99.97%-certified HEPA filter retains its original 99.97%+ efficiency even after hundreds of hours of operation
  • User-Friendly Controls - Recessed control panel for easy monitoring and control of the unit
  • Safety First - ETL/ETLc-certified to conform to UL507 and CSA 22.2 safety standards
  • Powerful Airflow - PAS1600SHS high-performance model creates high static pressure required for operating high-resistance drying attachments such as the Adaptidry Ceiling, Wall & Floor Drying System  


  • Stage 1 - Inexpensive 1” FIBER-TRAPPER® 1.0 pre-filter
  • Stage 2 - 2” pleated particulate pre-filter
  • Stage 3 (optional) - 2” high-capacity VAPOR-LOCK® carbon filter for odors (not included)
  • Standard 6”-deep HEPA filter - Tested and certified to 99.97% minimum efficiency @ 0.3 microns
  • Optional 12”-deep HEPA filter - Tested and certified to 99.97% minimum efficiency @ 0.3 microns

    *Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off for convenience. 


Additional Details:

  • Std Pkg Uom: EA
  • Std Pkg Qty: 1
  • Price Unit: EA
  • Package: 1EA
  • Material: 20 gauge stainless steel construction with solid, aircraft-type rivets
  • Amps: 7.00 A
  • Airflow: Two speed model up to 1,600 cfm
  • Air Changes Per Hour: 6 ACH @ 16,000 ft³
  • Power Supply Requirements: 120 volts AC, 60Hz, 15 amps
  • Pre Filter Access: Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass with separate slide-in compartments for
  • up to 3 pre-filter stages
  • Motorized Impeller: 0.9 HP standard efficiency/squirrel cage
  • Built In Dolly: Two-wheel dolly with 12” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for easy movement and control
  • Inlet Size: 12” inlet/outlet collar designed for attachment of flex duct, lay-flat duct (outlet only), or high static tools
  • Control Type: Protected recessed controls, Off/High/Low speed selector switch, power indicator lamp, separate ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, digital operating hour meter
  • Maximum Blower Static Pressure: 3.0” water gauge
  • Differential Filter Pressure Gauge: 5” diameter magnehelic gauge